Sundquist, B.E., R.Bruscato, L.F.Mondolfo, “The Structure of Eutectics,” Journal of the Institute of Metals. Vol. 91, Page 204.

Bruscato, R., “Heat Treating Medium Length Thin Wall Tubing and Assemblies,” Metal Treating Magazine. Feb. 1968, Page 18.

Bruscato, R., “Temper Embrittlement and Creep Embrittlement in 2-1/4 Cr-1 Mo Shielded Metal Arc Weld Deposits,” Welding Journal. April 1970, Page 148s-156s.

Bruscato, R., “High Temperature Embrittlement Phenomena of 2-1/4 Cr – 1 Mo Weldments,” Paper No. 71 Pet 19, Published by the American Society of Mechanical Engineers, Sept. 1971.

Bruscato, R., “Brittle Fracture in Welds & Weldments,” Welding Design & Fabrication. Part I – Nov. 1970, Page 68, Part II – March 1971, Page 55.

Bruscato, R., “A new Look at Brittle Fracture,” Presented at Steel Plate Fabricators Meeting, May 1974. Excerpts published in Welding Design & Fabrication, July 1975.

Bruscato, R., “Brittle Fracture Safe Design and Considerations Concerning Material Requirements for Pressure Vessel Steels,” Presented at Pressure Vessel Seminar, Boston, MA, Nov. 1975, published as a Company Publication, June 1976.

Clark, C., E. Upitis, R. Bruscato, “Refrigerated Storage of Liquified Gas – A Success Story,” Presented at Institute of Gas Technology Symposium on LNG Storage, Chicago, Illinois, January 1980.

Bruscato, R., “The measurement of Crack Arrest Fracture Toughness in Welded 9% Nickel Steels used in Cryogenic Storage Tanks,” Welding Journal, July 1981, Page 113s-120s.

Bruscato, R., Discussion on “The measurement of Crack Arrest Fracture Toughness in Welded 9% Ni Steels used in Cryogenic Storage Tanks,” Welding Journal, March 1982, Page 94s-96s.

Bruscato, R., “A Philosophy for Conducting Metallurgical Failure Investigations,” Welding Journal. March 1986, Pages 30-33.

Kostyk, D.A., R. Bruscato, “Incipient Failure Detection Techniques – Augment your Preventive Maintenance Program with Predictive Maintenance”, Presented at American
Power Conference, Chicago, Illinois, April 1986.      ,,,„

Bruscato, R., “Liquid Metal Embrittlement of Austenitic Stainless Steel When Welded to Galvanized Steel,” Welding Journal. December 1992, page 455s-459s.

Bruscato, R., H.M. Herro, “Failure of Zinc-Plated Self-Topping Screws and Belleville Washers Used to Install Spoiler Bars in Cast Iron Dryers,” Paper No. 285, Presented at NACE Corrosion Conference 1999, San Antonio, Texas.